|
Post by rupper on Jul 17, 2014 14:35:04 GMT -6
Looking for 10 Kohler F/A Flywheel nuts New or gently Used is fine. This is the nut that goes on the crank and holds the flywheel on. Also looking for 10 rubber grommets that protect the ignition wires coming thru the bell housing, used is fine. Could also use the same quantity of Flywheel keyways for the same motor.
|
|
|
Post by mrrupp1 on Jul 18, 2014 11:30:13 GMT -6
How many Rupp free airs do you have? I need a motor if you have one to spare. I bought out a Rupp dealer years ago, I will see what I have. Clint
|
|
|
Post by rupper on Jul 18, 2014 12:20:18 GMT -6
Hi Clint, I have a bunch of parts here and i figure i better look and see what i will need to complete them. I will likely need other small stuff like stator screws and the like but i am trying to find the Kohler only parts to make sure i have them on hand. Not building all Free airs, in fact not sure what i am going to build till i look thru and see what pistons i have to match up to cylinders. I will keep you in mind once i start some of the engine builds maybe starting this winter. Anyways, if you could take a look and see what you have i would really appreciate it. Also,if you know anyone that has piston stock i am still looking for one piston -an Elko 59.0 mm forged with a single L ring identified by the marking Elko A 1446/1 59.0 mm on the dome. That is one item that has escaped me so far. Jim...
|
|
|
Post by rupper on Feb 7, 2015 13:34:34 GMT -6
Hi Clint, Just checking in to see if you had a chance to look thru your inventory of parts for some of the pieces i was looking for. Any quantity you have, even if it's just one, is fine. Jim...
|
|
|
Post by mrrupp1 on Feb 9, 2015 15:07:43 GMT -6
Jim, I've been so busy here at the shop, I forgot to look. I will see what I have this week and get back to you. Clint
|
|