|
Post by snosnake on Dec 22, 2014 21:30:56 GMT -6
Not in the package
|
|
|
Post by snosnake on Dec 22, 2014 21:43:53 GMT -6
View AttachmentHere's the last NOS pistons this company had!!! we are using them in a rider and the contest sled for Waconia.they will be put to good use for a project sled. LOL found them on Amazon.com Hey Jerry can you post a picture of the top of the piston?
|
|
|
Post by dacota25d on Dec 23, 2014 12:15:27 GMT -6
Here's the last NOS pistons this company had!!! we are using them in a rider and the contest sled for Waconia.they will be put to good use for a project sled. LOL found them on Amazon.com Hey Jerry can you post a picture of the top of the piston? Attachment Deleted
|
|
|
Post by snosnake on Dec 23, 2014 14:52:04 GMT -6
Ya might want to use a BFH to install them... Those are a 69mm piston... They ain't going to fit unless you bore the cylinder out and have it rechromed. Plus you might want to make sure they have the chromemolly rings as the pistons were made for the 2T engine (steel bore)
|
|
|
Post by dacota25d on Dec 23, 2014 15:18:12 GMT -6
Don't worrie they are going in a cast bore motor they'll fit like A glove when I'm done
|
|
|
Post by snosnake on Dec 23, 2014 22:11:43 GMT -6
Me bad, I guess I should have looked at the Jug's first.
A steel bore kohler just ain't right.
|
|
|
Post by snosnake on Dec 28, 2014 17:09:29 GMT -6
Come to think of it thats not a Rupp part. So to get that into a Rupp Kohler you are still going to need a BFH...
|
|
|
Post by dacota25d on Dec 28, 2014 20:40:58 GMT -6
I'll have to get the bfh out tomorrow when I try to put it together most likely
|
|
|
Post by snosnake on Dec 28, 2014 22:46:38 GMT -6
Not really the point I was trying to make.
|
|
|
Post by dacota25d on Dec 29, 2014 8:59:39 GMT -6
OK since its not a rupp part I'll just pull out of the build
|
|
|
Post by snosnake on Dec 29, 2014 9:55:02 GMT -6
OK since its not a rupp part I'll just pull out of the build Just because you can use any Kohler made for the Rupp build off does not make it a Rupp part. It might be a part your putting on a Rupp but that does not make it a Rupp part.
|
|
|
Post by snosnake on Dec 29, 2014 15:18:41 GMT -6
OK since its not a rupp part I'll just pull out of the build Dacota if your going to pull out of the build you need to let me know right away. There is a few of us that have a lot of money tied up in this.
|
|
|
Post by magnesium on Dec 29, 2014 17:45:46 GMT -6
What's the issue here? My triple might have a Brut stator and a Centurion cdi. My clutch may have been from a Cat dealer, don't know. I thought "customs" were allowed?
|
|
|
Post by dacota25d on Dec 29, 2014 18:58:24 GMT -6
I was just giving rick a hard time
|
|
|
Post by magnumed on Dec 29, 2014 19:19:25 GMT -6
I was just giving rick a hard time He is returning the favor, more the better on the build. We need to set the standard for future builds. It has given me a lot of ambition and plans for the next sled. Maybe two at once. Lol.
|
|
|
Post by snosnake on Dec 29, 2014 19:26:29 GMT -6
Hey DaKota............... It's been awhile since someone can take my shit and shove it right back to me and then come back for more...
The Rupp Build Off has nothing to do with the topic..... New in the package Rupp parts
|
|
|
Post by dacota25d on Dec 29, 2014 19:29:40 GMT -6
Ha easy with the 2 sleds at once I'll tell ya that's quite a chore
|
|
|
Post by dacota25d on Dec 29, 2014 19:30:45 GMT -6
Hey DaKota............... It's been awhile since someone can take my $hit and shove it right back to me and then come back for more... The Rupp Build Off has nothing to do with the topic..... New in the package Rupp parts Oh right my bad wrong topic
|
|
|
Post by magnesium on Dec 29, 2014 19:38:07 GMT -6
Fooled me while you were at it.
|
|
|
Post by magnesium on Dec 29, 2014 19:43:22 GMT -6
Not really the point I was trying to make. That you can pick nits?
|
|