|
Post by ruppluver on Aug 10, 2014 19:59:33 GMT -6
I need a sealed beam headlite[4 1/2" O.D.,2 wire hookup & single filament] & 2 each Sno-Sport hood emblems Let me know what you have. Thanks.
|
|
|
Post by daren007 on Aug 11, 2014 19:37:53 GMT -6
Use GE4416. dc
|
|
|
Post by snosnake on Aug 13, 2014 14:43:06 GMT -6
Thanks Daren...I needed that number.
|
|
|
Post by ruppluver on Sept 3, 2014 19:18:16 GMT -6
I got the headlites.I also sanded the chrome off the SnoSport emblems,will paint them & try to figure out how to mount them.Studs are broken. Studs are broken to,on the hood vents.Ideas on how to fasten them? Thanks.
|
|
|
Post by yellowlab2 on Sept 3, 2014 20:27:43 GMT -6
I used some thin cut pieces of 2 sided foam tape!
|
|
|
Post by lemans1955 on Sept 3, 2014 20:48:59 GMT -6
3m weather stripping and car emblem adhesive. Stuff is great for that kind of stuff, works good for handlebar grips as well.
|
|
|
Post by snosnake on Sept 4, 2014 16:09:39 GMT -6
Clear silicone
|
|
|
Post by ruppluver on Sept 4, 2014 19:12:51 GMT -6
Rick,have you used the clear silicone before? I know that it sticks to just about EVERYTHING!!
|
|
|
Post by snosnake on Sept 12, 2014 15:26:04 GMT -6
Yes I have Dan but don't use to much
|
|
|
Post by ruppluver on Sept 13, 2014 20:05:11 GMT -6
Ok,I'll try it,after hood cures another few days.
|
|