|
Post by dacota25d on Aug 26, 2014 17:46:14 GMT -6
Just curious if anyone has/had or has pics of a dual carb adapter for the tohastu fanners or was something like this never made for rupps?
|
|
|
Post by lemans1955 on Aug 26, 2014 19:08:24 GMT -6
I've heard rumors and have seen pictures.
|
|
|
Post by ruppluver on Aug 26, 2014 19:33:52 GMT -6
I've seen them for EVERYTHING except the Tohatsu engines!!
|
|
|
Post by dacota25d on Aug 26, 2014 19:40:18 GMT -6
yea ive heard rumors but id like to see some pics of one. who knows with some pics its may be possible to remake one close to the same
|
|
|
Post by snosnake on Aug 26, 2014 20:59:56 GMT -6
I don't think is such a thing as dual carbs on a 73 and older Tohatsu fan.
|
|
|
Post by lemans1955 on Aug 27, 2014 10:54:48 GMT -6
440 experimental cylinder (tohatsu) The only picture I've ever seen of a twin carb intake on a tr440 is this picture Rick put up a few months ago.
|
|
|
Post by lemans1955 on Aug 27, 2014 10:55:10 GMT -6
That's the name of the thread its in.
|
|
|
Post by dacota25d on Aug 27, 2014 17:11:03 GMT -6
hmm well maybe ill just have to dream something up and make one some day
|
|
|
Post by lemans1955 on Aug 27, 2014 19:04:58 GMT -6
If you ever make one I'll take one for a tr340s small block motor with HR carbs :-)
|
|
|
Post by dacota25d on Aug 27, 2014 20:08:05 GMT -6
haha it might be a day or two yet. Ive just recently acquired a mill and a lathe so once i get the hang of it this will be one thing i will most definitely try to make
|
|
|
Post by snosnake on Aug 28, 2014 21:23:36 GMT -6
I'll Take a set for the 400-440
|
|
|
Post by dacota25d on Aug 28, 2014 22:18:46 GMT -6
haha we'll have to see if i can even make anything first!
|
|
|
Post by magnesium on Aug 29, 2014 3:52:20 GMT -6
haha we'll have to see if i can even make anything first! Start with manifold from a 775 T'NT.
|
|
|
Post by snosnake on Aug 29, 2014 9:40:14 GMT -6
|
|
|
Post by magnesium on Aug 29, 2014 11:09:51 GMT -6
Yes. I haven't put one against a motor yet, but it looks like a good starting point. Mikuni flanges should fit.
|
|
|
Post by ruppluver on Aug 29, 2014 12:17:34 GMT -6
I'm sure Greg Lahr,aka,sprocket could make them.
|
|
|
Post by magnumed on Aug 29, 2014 16:14:21 GMT -6
haha we'll have to see if i can even make anything first! Start with manifold from a 775 T'NT. Too wide where it bolts up to the cylinders. .. Sent from my SPH-L720 using proboards
|
|
|
Post by magnesium on Aug 29, 2014 16:19:36 GMT -6
The Rotax manifold would need to be whittled down,I agree. I bought a tnt manifold but bought a twin-carb Tohatsu and lost interest.
|
|
|
Post by dacota25d on Aug 29, 2014 17:01:10 GMT -6
Does anyone actually have a picture of twin carbs mounted on a tohatsu
|
|
|
Post by lemans1955 on Aug 29, 2014 17:42:32 GMT -6
Rick put one up a couple months ago in the thread about experimental tohatsu motors.
|
|