|
Post by lemans1955 on Sept 20, 2014 19:32:57 GMT -6
Hey guys, getting down to the nitty gritty details now with my 74 Nitro racer project. I was having a hard time figuring out where the fuel pump mounts. Attachment DeletedThis is where I have figured out it might go, but the pump itself doesn't really fit there. The fuel tank bracket above it and the engine mount below are to close to the intake and exit ports. Is there some kind of bracket I am missing, the chassis is a 76 rally chassis so that may also be an issue. The original 74 chassis bulkhead was rusted beyond repair. I don't like asking you guys unless I'm really stumped, but I know I will get the info I need here. Thanks for any help, it is much appreciated!
|
|
|
Post by dacota25d on Sept 20, 2014 21:37:42 GMT -6
not my pic I found it here on the board but you can see where it goes. It looks like you have the right spot Attachment Deleted
|
|
|
Post by lemans1955 on Sept 21, 2014 6:28:39 GMT -6
Thanks for the pic, it looks like the same location I wonder if I need to move it the other way around. Or if the fuel pump was actually from another model and doesn't have the correct intake-outake port configuration.
|
|
|
Post by lemans1955 on Sept 21, 2014 6:31:58 GMT -6
I see it now on further examination of your picture it seems there are some riser blocks underneath the pump which rises it above the bracket and motor mount. Thanks again!
|
|
|
Post by dacota25d on Sept 21, 2014 6:35:37 GMT -6
You bet. Good luck with the project
|
|