|
Post by helrazr on Oct 29, 2014 10:36:29 GMT -6
My spindle is touching my clutch how do i straighten it guys
|
|
|
Post by lemans1955 on Oct 29, 2014 10:47:52 GMT -6
Find a straight one. They aren't too hard to find.
|
|
|
Post by helrazr on Oct 29, 2014 10:53:20 GMT -6
Find a straight one. They aren't too hard to find. Okay
|
|
|
Post by lemans1955 on Oct 29, 2014 10:56:45 GMT -6
I had to do the same thing with my 74 nitro I had the whole front steering all painted and looking good and realized as I was putting it back together that one of my spindles was bent. I would post something in the classifieds you will find someone who can help.
|
|
|
Post by red19lite on Oct 29, 2014 10:59:29 GMT -6
check your rubber motor mounts also they may be shot allowing engine to sag
|
|
|
Post by kronnikracing on Oct 29, 2014 12:02:04 GMT -6
Are you running a hex clutch or a comet clutch? I agree with kevin. In the past we have had aluminum front mounts machined to ensure the correct clearance of the clutch.
|
|
|
Post by helrazr on Oct 29, 2014 13:45:47 GMT -6
Okay i will check them to thanks guys awesome
|
|
|
Post by snosnake on Oct 29, 2014 13:46:09 GMT -6
also make sure you bulkhead is not bent.
|
|
|
Post by helrazr on Oct 29, 2014 13:47:01 GMT -6
Okay i will check them to thanks guys awesome Its the hex clutch
|
|
|
Post by helrazr on Oct 29, 2014 22:08:55 GMT -6
By the looks of things looks like a rubber mount is missing in between the aluminum cross memberand the steel frame by the spindle on clutch side correct me if im wrong but shouldn't there be one there there is one on the other side
|
|
|
Post by red19lite on Oct 30, 2014 6:38:37 GMT -6
should be rubber mounts both sides, I have new replacement motor mounts they are 9.99 each set of 4 are 39.99 with free ship . pm if you need the mounts , kevin
|
|
|
Post by helrazr on Oct 31, 2014 12:15:29 GMT -6
should be rubber mounts both sides, I have new replacement motor mounts they are 9.99 each set of 4 are 39.99 with free ship . pm if you need the mounts , kevin Thanks for the offer but i found a nos one here locally so im goof to go but thanks hey!!!!
|
|
|
Post by 2dawgs on Nov 23, 2014 2:05:16 GMT -6
should be rubber mounts both sides, I have new replacement motor mounts they are 9.99 each set of 4 are 39.99 with free ship . pm if you need the mounts , kevin Thanks for the offer but i found a nos one here locally so im goof to go but thanks hey!!!! Lots of "goof's" here, and I am the ring leader...Bwaaahahahaha. ;-)
|
|