|
Post by ruppluver on Feb 26, 2015 10:34:04 GMT -6
I need a recoil for a 399 Hirth. Anyone? Is there something else that will interchange with Hirth? Thanks.
|
|
|
Post by drrupp on Feb 26, 2015 18:43:21 GMT -6
Dan I think I have one off a 634 not sure if they are the same.
|
|
|
Post by ruppluver on Feb 26, 2015 19:02:42 GMT -6
PM sent. 6 mounting holes,each 4" on center.The hub sticks out 2" from the fan. O.D. of the hub is 4 3/4".I.D. is 2",where the pawls engage.
|
|
|
Post by red19lite on Feb 26, 2015 20:52:07 GMT -6
Dan I think I have one off a 634 not sure if they are the same. they are the same all single and twins with that bolt pattern
|
|
|
Post by red19lite on Feb 26, 2015 20:52:24 GMT -6
Dan I think I have one off a 634 not sure if they are the same. they are the same all single and twins with that bolt pattern
|
|
|
Post by Rupp Doctor on Feb 27, 2015 7:45:42 GMT -6
Yae you can use one off any of them they do interchange, i have done it. let me know if drrupp don't come through i may have a spare.
|
|
|
Post by ruppluver on Feb 27, 2015 9:56:14 GMT -6
I've got plenty of feelers out for one.Thanks for the help.I'll let you know after I sift through all the replies.
|
|
|
Post by drrupp on Feb 28, 2015 9:59:10 GMT -6
Dan I have one email me. Drrupp@aol.com
|
|