|
Post by kronnikracing on Mar 5, 2015 7:58:08 GMT -6
Anyone know what the difference is between the comet 102c and 108c clutches? Trying to find a good used one for a project and it seems there are a ton more of the 108c's out there than the 102c's. Arctic cat ran them in the 80's and 90's and im 99% sure they were 30mm taper. Any thoughts or ideas on what you guys have found to work fine? Im running the newer style arctic roller secondary narrowed up a touch to fit the 1 1/4" belt. Thanks. Luke
|
|
|
Post by jimgrandmi on Mar 5, 2015 12:23:33 GMT -6
Luke,
Here's my limited knowledge; the 108 is a larger diameter and requires a wider belt, I don't think an 1-1/4" wide belt will work effectively.
I have both styles but haven't been able to make the 108 work on my Rupp.
I think all the weights and springs are interchangeable between the 2 styles.
Good luck.
Jim Kelly
|
|