|
Post by yellowlab2 on May 29, 2015 16:05:36 GMT -6
Would someone tell me what the correct bearing number is for the driveshaft bearings on a '72/73 Nitro? Thanks!
|
|
|
Post by lemans1955 on May 29, 2015 21:46:34 GMT -6
I believe they are a 6006RS bearing. Correct me if I'm wrong.
|
|
|
Post by mrmotors on May 29, 2015 22:28:57 GMT -6
On bearings and seals, if you have the shaft size and the bore size, a bearing house can usually come up it. With bearings, they mat require the width as well sometimes.
|
|
|
Post by ruppman on May 30, 2015 4:03:11 GMT -6
Kyle has the correct # 6006rs
|
|
|
Post by yellowlab2 on May 30, 2015 12:39:29 GMT -6
Thanks, guys, I had to order them at th local auto supply store as Royal Distributing doesnt carry that number anymore! Costs a bit more, but I do save on gas for the hour round trip!
|
|
|
Post by lemans1955 on May 30, 2015 18:25:35 GMT -6
I usually order any bearings I need from VXBearings.com great prices and they have any kind of bearing you could think of.
|
|
|
Post by snosnake on May 31, 2015 11:32:36 GMT -6
I have front and rear bearings in stock all of the time. 10.00 ea plus shipping.
|
|
|
Post by Stretch on May 31, 2015 12:17:03 GMT -6
|
|
|
Post by snosnake on Jun 3, 2015 19:02:38 GMT -6
Nope they are made in Japan NTN with a orange seal. I'm about out of them(rear) The front have a blue seal and are made in USBB How many axle seals and Drivers can you get from them? Or any other Rupp parts?
|
|
|
Post by Stretch on Jun 3, 2015 21:33:12 GMT -6
$10 for an "NTN" bearing is actually pretty cheap and no, I would not have thought to buy any Rupp parts from a bearing importer??? But then again, I would also not think of spending $10 on a bearing that I can buy for $2.16 that will get the job done just as well.
If you want the best, call Rick... if not, there are other options!
|
|
|
Post by snosnake on Jun 7, 2015 15:54:33 GMT -6
$10 for an "NTN" bearing is actually pretty cheap and no, I would not have thought to buy any Rupp parts from a bearing importer??? But then again, I would also not think of spending $10 on a bearing that I can buy for $2.16 that will get the job done just as well. If you want the best, call Rick... if not, there are other options! Stretch my point was if you keep looking for the cheapest parts somewhere else there might not be any Rupp parts out the to buy. As all the guy's that had parts had to get a job at walmart and are now hording there parts again. Just food for thought.
|
|
|
Post by red19lite on Jun 10, 2015 19:17:29 GMT -6
you can always shop for the cheap stuff,but you better help support your rupp parts guys that few bucks there going to makwe will probally go right back in other rupp parts and services for the long run, if you don't need any spts panels hoods and other stuff I am sure that couple bucks profit on those bearings helps the supplier with the other not so easy to get parts from rick, bill, and me . kevin
|
|
|
Post by Stretch on Jun 13, 2015 8:18:24 GMT -6
you can always shop for the cheap stuff,but you better help support your rupp parts guys that few bucks there going to makwe will probally go right back in other rupp parts and services for the long run, if you don't need any spts panels hoods and other stuff I am sure that couple bucks profit on those bearings helps the supplier with the other not so easy to get parts from rick, bill, and me . kevin Yeah, I get it... point taken. Now consider this; If I can save a few bucks buying the non-Rupp specific parts like nuts & bolts and bearings, etc., that is going to put more money in my pocket to spend on those Rupp parts and services that you guys provide! And I have! Don't think that I am not appreciative or thankful for the parts and services you provide and the business' that you have built because I am and I DO support you. Without guys like you, guys like me would be in a "world of hurt". Sure, I could ramble on about how the RB TECH bearings meet the ABEC3 specifications, the double lip seals, the multi-temp SRL grease tested @ -40 below celcius, blah, blah, blah... but the fact is, if Rick had merely mentioned that the bearings he had for sale were "NTN" bearings I never would have quoted him and we wouldn't be having this conversation! Now it has progressed to working at Wallmart, hoarding and keeping your business going? C'mon... we're talking about f*ing bearings! I thought I would have a little fun (admittedly) at Rick's expense, I thought he could take it (and I think he can) and that was all... I had no idea that it would have gone this route. I didn't mean to bash anyone's business or hurt anybody's feelings but for pete's sake, does every thread on this board have to be so touchy???
|
|
|
Post by red19lite on Jun 13, 2015 13:49:50 GMT -6
you can always shop for the cheap stuff,but you better help support your rupp parts guys that few bucks there going to makwe will probally go right back in other rupp parts and services for the long run, if you don't need any spts panels hoods and other stuff I am sure that couple bucks profit on those bearings helps the supplier with the other not so easy to get parts from rick, bill, and me . kevin Yeah, I get it... point taken. Now consider this; If I can save a few bucks buying the non-Rupp specific parts like nuts & bolts and bearings, etc., that is going to put more money in my pocket to spend on those Rupp parts and services that you guys provide! And I have! Don't think that I am not appreciative or thankful for the parts and services you provide and the business' that you have built because I am and I DO support you. Without guys like you, guys like me would be in a "world of hurt". Sure, I could ramble on about how the RB TECH bearings meet the ABEC3 specifications, the double lip seals, the multi-temp SRL grease tested @ -40 below celcius, blah, blah, blah... but the fact is, if Rick had merely mentioned that the bearings he had for sale were "NTN" bearings I never would have quoted him and we wouldn't be having this conversation! Now it has progressed to working at Wallmart, hoarding and keeping your business going? C'mon... we're talking about f*ing bearings! I thought I would have a little fun (admittedly) at Rick's expense, I thought he could take it (and I think he can) and that was all... I had no idea that it would have gone this route. I didn't mean to bash anyone's business or hurt anybody's feelings but for pete's sake, does every thread on this board have to be so touchy??? I guess were all a bunch of grouchy guy,s I like to save money when I can also, but no hard feelings here, everybody does what they have to make there budget work with there projects, a lot of work on the project can out pace the money spent most of the time, if the project isn.t a turd {bad shape} , kevin I hate finding hardware nuts and bolts for customers I run power equipment business and guy comes in needs a bolt don't know what size or thread std or metric just needs a bolt about that size, how many times can I go to the bolt bins pull a bolt and then he needs a bigger one, guess I don't have any, already lost time, those liitle sales take time with little return a lot of times, home depot, lowes, tsc have bolts and hardware, a lot of time they make you buy a bubble pakage when 4 pieces in
|
|
|
Post by snosnake on Jun 13, 2015 20:02:57 GMT -6
No Harm done I was just saying. No big deal. stretch I want to thank you for the parts you have bought form me and everyone else as far as that goes.
Most topic's get out of hand here. It's pretty much the norm. Your going to have this on any site that's pretty much wide open.
|
|
|
Post by Stretch on Jun 14, 2015 9:43:26 GMT -6
Kumbaya...
|
|