|
Post by Johnny Speed on Oct 5, 2015 19:20:06 GMT -6
|
|
|
Post by lemans1955 on Oct 6, 2015 18:26:11 GMT -6
It's a kohler 2as case probably from a nitro ii.
|
|
|
Post by lemans1955 on Oct 6, 2015 18:29:37 GMT -6
What are your plans for it?
|
|
|
Post by Johnny Speed on Oct 7, 2015 18:47:41 GMT -6
Spins over freely but I would split and clean, I will sell for $45 picked up, don't know how to package this to ship?
|
|
|
Post by lemans1955 on Oct 8, 2015 11:33:41 GMT -6
A big box with alot of packing would suffice but it would be expensive. Although I would def be interested, where are u located? I am in MA.
|
|
|
Post by Johnny Speed on Oct 8, 2015 18:43:07 GMT -6
|
|
|
Post by MrPeabody on Oct 8, 2015 19:03:13 GMT -6
Some people like to say that but, the 76 nitro I have has them and it has been in the family since new.
|
|
|
Post by Johnny Speed on Oct 9, 2015 22:36:18 GMT -6
Attachment DeletedAttachment DeletedAre the rumble packs the same for all engine sizes in 76? Magnums and Nitro's are the same other then silver or black paint? 77 and 78 Nitro's any different from 76?
|
|
|
Post by Johnny Speed on Oct 10, 2015 21:21:45 GMT -6
Attachment DeletedI removed the clutch, it is a Rupp! Do the 15790-99 numbers indicate a model or year?
|
|
|
Post by snosnake on Oct 12, 2015 15:13:11 GMT -6
The silver cans should be from early runs of the 76 Nitro's and Magnum's
|
|
|
Post by Johnny Speed on Oct 12, 2015 16:26:38 GMT -6
Thanks Rick, are all cans the same for all engine sizes?
|
|
|
Post by Hoots on Oct 23, 2015 10:02:29 GMT -6
Thanks Rick, are all cans the same for all engine sizes? Some will say 250 is smaller pipe dia. but my (2) 250's mic'ed the same as 440's. So I would say yes, 250,340,440, all same?
|
|
|
Post by snosnake on Oct 23, 2015 11:20:41 GMT -6
All of the can's I have seen were the same size.
|
|
|
Post by aarron1 on Nov 17, 2015 18:20:59 GMT -6
I removed the clutch, it is a Rupp! Do the 15790-99 numbers indicate a model or year? Hi there, I just joined after I was searching for a clutch for my Rupp Go Joe and found this thread. That's the exact clutch I am looking for my Kohler K295. Might it be for sale or can you possibly tell me where I may find one? Thanks!
|
|
|
Post by Johnny Speed on Nov 17, 2015 19:47:47 GMT -6
Sent you a pm
|
|