|
|
Post by by on Nov 21, 2007 18:29:05 GMT -6
Hi i had to change out my track on my 76 nitro and i had notice that the clutch was hiting the top of my spindle is this right only a little clearce between them any help with this let me know thanks-ruppfan  |
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Nov 21, 2007 21:45:06 GMT -6
Ruppfan might be getting some photos posted. I would be easier to see where his problem is.
Ruppfan, if you need help gettin photos up, drop me another note and ill help you.
|
|
davet
Senior Member
Posts: 65
|
Post by davet on Nov 22, 2007 13:57:31 GMT -6
Im guessing i know what may be wrong....i had that issue and thanks to the guys here .....i fixed it.
your engine mounts to a motor plate, between the motor plate and the engine (where the bolts pass through) there should be several washers and aluminum spacer/sleeves.
Mine was missing all the washers. while i wasnt right on the spindle with the clutch, it was so close i couldnt get the Belt on.
check that there are washers between the motor plate and the aluminum spacer sleeves.
|
|
