|
|
Post by ben550 on Mar 16, 2008 16:33:59 GMT -6
does anyone have the center distances for the rear skid mounting holes on the 71magnum, 72nitro, 73nitro, and 73magnum? thank you.
|
|
magnumforce
Administrator'
{S=0}
NEW EMAIL ADRESS:ruppster@ymail.com Microsoft took away my hotmail account after 12 years, so....
Posts: 1,423
|
Post by magnumforce on Mar 17, 2008 12:15:57 GMT -6
Just did a quick measurment of a couple...
'73 Nitro 30 & 3/4"
'71 Magnum 600, lots of mount points, front hole, 2nd from the bottom (there are 5) to the rear hole is 36", and 7 & 1/4' between the other 6 (4 used) I will try and get a pic so you can see, this is the W/T
|
|
|
|
Post by ben550 on Mar 17, 2008 17:26:15 GMT -6
thank you. i dont know how i ended up under the classified section. i have a project planned, i want to use a 71mag.,or 72 nitro chassis because of the alum. bulkhead, but i would like to use a 73nitro susp. it it will fit.
|
|
magnumforce
Administrator'
{S=0}
NEW EMAIL ADRESS:ruppster@ymail.com Microsoft took away my hotmail account after 12 years, so....
Posts: 1,423
|
Post by magnumforce on Mar 17, 2008 18:20:23 GMT -6
Sorry Ben, i must have posted the same time as you, no problem at all, your welcome
|
|
