|
|
Post by wigman25 on Mar 20, 2008 19:11:07 GMT -6
OK Guys, STILL looking for a set of the corrugated rubber running board treads for my '77 Nitro. Looking for a NOS set. I have gotten samples of different manufacturer's stuff to make my own, but none of them are the same. Thanks. Wig
|
|
|
|
Post by Rip-it-Rupp on Mar 20, 2008 21:06:26 GMT -6
Wig, that is going to be tough. I used the 3M sticky backs for my resto, but not sure if they make anything similar to what you are looking for. I will look at my work (we usually have some stuff laying around) and see if there is something kicking around that you can use for this. rip
|
|
|
|
Post by wigman25 on Mar 21, 2008 22:56:31 GMT -6
Thanks Rip: Been looking for these things for ages, just can't seem to find the right material. I know it is out there somewhere, but where??? Rupp certainly didn't have their own corrugated rubber plant! Thanks for looking for me, I appreciate it. Wig
|
|
|
|
Post by ben550 on Mar 22, 2008 6:51:48 GMT -6
most of the suppliers were from ohio ,eg. goodyear, tillotson etc. look for any manufacturers close to mansfield to start.
|
|
