|
|
Post by StingerSS427 on Mar 19, 2015 8:09:55 GMT -6
I bought a Rupp Magnum 250 and the two clutches are gone. I am new to Rupp and do not know what the factory original clutches were on the Xenoah 250 l/c engine. Any help would be appreciated. Are there any production numbers or dates I need to be aware of.
|
|
|
|
Post by red19lite on Mar 19, 2015 13:26:32 GMT -6
I bought a Rupp Magnum 250 and the two clutches are gone. I am new to Rupp and do not know what the factory original clutches were on the Xenoah 250 l/c engine. Any help would be appreciated. Are there any production numbers or dates I need to be aware of. the clutches were arctic cat why don't you use the ones off the arctic 4000 your are parting out you may have to change weight and ramps and springs |
|
|
|
Post by StingerSS427 on Mar 19, 2015 13:40:01 GMT -6
I will hang onto the ones I have then, for now. Like I said, I'm new to Rupp so I wasn't sure. It is nice to know they were AC parts. I will have to start looking for an NOS setup. Any idea where I can find the weight, spring, and ramp specs on the 250? Thanks for the reply.
|
|
|
|
Post by bobsapp on Apr 4, 2015 12:11:03 GMT -6
All 76 model Nitros/Magnums have the same primary and secondary clutches!! Good Luck
|
|
|
|
Post by StingerSS427 on May 4, 2015 12:08:55 GMT -6
I picked up a 76 Nitro with the 340 xenoah. It still had the clutches so I'm on my way. I ordered up weights, ramps, and spring for the primary. Having an issue with determining the spring in the secondary. I thought I saw a little blue or black on part of it but I have seen pictures of them with red, and pictures of black. Anyone have some definite information on the spring used on the secondary?
|
|
|
|
Post by Ruppsforever on May 4, 2015 18:42:47 GMT -6
All the L/C Rupp secondary springs are the same. They are black. Other springs can be used though.
|
|
|
|
Post by StingerSS427 on May 5, 2015 10:32:40 GMT -6
Ok, thanks for the information. A good place to start.
|
|
