|
|
Post by rupper on Mar 1, 2016 12:45:11 GMT -6
Looking for an alternate method to clean the external surfaces of my aluminum heads cylinders and crankcase other than sand/soda blasting. Let me know what worked or didn't work.....thanks..Jim...
|
|
|
|
Post by portagelake1 on Mar 19, 2016 14:27:21 GMT -6
I just used a 3 to 1 solution of transmission fluid and acetone to clean my crankcase from a xenoah 440 liquid. The case looks brand new now.
|
|
|
|
Post by rupper on Mar 28, 2016 8:56:17 GMT -6
Did you soak the whole case and wire brush it after or just spray it on and rise it off? More details are appreciated....
|
|
|
|
Post by portagelake1 on Mar 28, 2016 9:10:54 GMT -6
I let it soak for a couple of hours and brushed it with a small paint brush.
|
|
|
|
Post by rupper on Mar 28, 2016 10:09:50 GMT -6
Ok..thanks for the update..I will give it a shot.....
|
|
|
|
Post by portagelake1 on Apr 13, 2016 6:44:59 GMT -6
Rupper,
How did the cleanup go ?
|
|
|
|
Post by rupper on Apr 14, 2016 7:56:11 GMT -6
I haven't got to that job yet as i had some other items that needed attention. Will likely get to it in the warmer weather. Will post an update when i eventually get to it and let you know how i made out.
|
|
