|
Post by magnumal on Jul 22, 2008 15:26:38 GMT -6
I have added to this post. But it came out in the beginning of post . Check it out
|
|
|
Post by wigman25 on Jul 22, 2008 19:56:45 GMT -6
That track should be good for some serious wheelie action!!!
|
|
|
Post by magnumal on Jul 23, 2008 10:45:23 GMT -6
Ya now how do I change my drive axle sprockets?
|
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 23, 2008 11:35:47 GMT -6
MAN !! I'll never catch you now ! Remind me NOT to ride in front of you. I dont want to get run over by all those daggers hanging off the track ! ;D
|
|
|
Post by magnumal on Jul 23, 2008 16:24:58 GMT -6
ok Iam going to bite How am I famous and by the way wigman where did you get that little dinky have fun with this one I wont run
|
|
|
Post by wigman25 on Jul 23, 2008 17:38:23 GMT -6
1.) You are famous because of the monster trophy you won with that Magnum of yours.
2) My little "dinky" is much larger than you would think!!! I prefer to call it Mr. Johnson.
Now, down to business - if the drive sprockets you have are 1" inside diameter, then you can just press the old sprockets off, press the new ones onto your Rupp axle in the right spots, drill the shear pin holes, set the pins and you are off and running.
Now, aren't you glad I am your friend??? Wig
|
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 23, 2008 18:45:14 GMT -6
Wig...........I just BUSTED out laughing reading what you just wrote !! Thanks for a good laugh ! ;D
|
|
|
Post by magnumal on Jul 24, 2008 8:03:55 GMT -6
Thanks and ill have to take your word for it
|
|
|
Post by wigman25 on Jul 24, 2008 19:02:38 GMT -6
|
|
|
Post by magnumal on Aug 7, 2008 11:13:21 GMT -6
|
|
|
Post by wigman25 on Aug 7, 2008 13:53:23 GMT -6
That bulkhead came out really nice, and that chaincase is SHARP!!! Wig PS: I just bought one of those pneumatic riveters - this thing is AWESOME!! I've been riveting everything in sight!!! I gguess I am getting a little carried away with it: My wife is never going to forgive me for doing this to my nephew:
|
|
|
Post by magnumal on Aug 29, 2008 17:29:44 GMT -6
Got the suspension in my sprint modified 74 to fit older chassis now clean and get motor working Iam thinking about putting kohler 440 fan in it
|
|
|
Post by wigman25 on Aug 29, 2008 17:53:45 GMT -6
Very creative! That thing will fly with the Kohler in it. Looks like that leaf spring has a lot of tension on it, is it gonna hold up? Wig
|
|
|
Post by magnumal on Sept 2, 2008 10:28:06 GMT -6
I think I have 75 free air leaf spring in it ? They are curved like that ;D I only need the sled to go straight down the smooth field faster than Dave , not going to trail ride it .
|
|
|
Post by magnumal on Sept 4, 2008 17:57:54 GMT -6
Major set back today Put my fan motor in free air chassis to test start it. Lost piston and rings on one side and crank doesnt spin free Going to have to dig deep to get another motor running
|
|
|
Post by wigman25 on Sept 4, 2008 18:17:22 GMT -6
OOOOOOOOOPS. What happened?
|
|
|
Post by by on Sept 4, 2008 19:13:21 GMT -6
how come my nitro 11 looks differnt then yours -fan
|
|
|
Post by onlyhere4themoney on Sept 4, 2008 19:38:19 GMT -6
You might not want to run the F/A springs on that mid motor Rupp.
|
|
|
Post by magnumal on Sept 7, 2008 15:37:04 GMT -6
If you haven't noticed not many of my rupps look like any other ones . But Iam not sure post picture of yours here
|
|
jason
Senior Member
Posts: 53
|
Post by jason on Sept 7, 2008 19:24:59 GMT -6
Fan, I think Al posted his new project in with his Nitro II post.
|
|