|
|
Post by zixxerboy on Dec 15, 2008 11:53:13 GMT -6
Pistons for my 76 340 Sprint just showed up. I need specs for the case bolts as well as the head. Anyone know these or could point me to a location on the net?
This is a 340cc Xenoah fan cooled.
Thanks in advance.
Ron
|
|
|
|
Post by Kowality on Dec 15, 2008 12:29:32 GMT -6
Cylinder . . . . . . . . . . . . . . . . . . . . . . .14-16
Cylinder head . . . . . . . . . . . . . . . . . .14-16
Crankcase . . . . . . . . . . . . . . . . . . . . . .14-16
Flywheel . . . . . . . . . . . . . . . . . . . . . . .45-55
Fan shaft nut. . . . . . . . . . . . . . . . . . .28-32
|
|
|
|
Post by zixxerboy on Dec 17, 2008 12:04:59 GMT -6
that's foot pounds. Correct?
|
|
|
|
Post by Kowality on Dec 17, 2008 16:29:58 GMT -6
Right
|
|
|
|
Post by zixxerboy on Dec 23, 2008 20:26:15 GMT -6
Thanks Oldschool
One more question - On one end of the crank there is two bearings and on the other only one. On the end with only one bearing there is also a thin metal washer. Does this washer go between crank and bearing (on before bearing) or between the crank and cases (after bearing).
I just picked up my freshly machined jugs so any help is appreciated. Thanks
|
|
