|
|
Post by ruppluver on Jun 18, 2009 11:47:41 GMT -6
Is there any advantage in putting a single Mukuni carb on a Tohatsu 440-40hp? Pros/cons? thanks.
|
|
|
|
Post by nitroenforcement on Jun 18, 2009 20:11:19 GMT -6
I will say this, there is only pros in my book! We have one on both of our yankees. They work so much better and give them a little more umph! granted I believe they are 30hp, but still it keeps up with my 75 nitro 340 fc. Before I was doin circles around it. My advice to everyone, when in doubt, put a mikuni on it!
|
|
|
|
Post by nitroenforcement on Jun 18, 2009 20:32:34 GMT -6
You sure can. I would advice you use the shorter cable.
|
|
|
|
Post by nitroenforcement on Jun 18, 2009 20:34:29 GMT -6
Also I believe you are going to need a different carb boot to make it fit. Do you have one already?
|
|
|
|
Post by ruppluver on Jul 4, 2009 13:26:50 GMT -6
Yes,I have the correct carb boot. don't have a fuel pump yet,anyone got a good used one that works? thanks.
|
|
|
|
Post by ruppluver on Jul 6, 2009 21:08:24 GMT -6
My next build,a 1970WT,will have a 440 with the Mikuni carb.The whole back of motor is in the open,so that will work just hunky-dorey! My motor is getting different jugs/pistons/rings,the carb is being checked out and I got the Comet clutch already for it. It just doesn't get any better than this!!
|
|
|
|
Post by rupprupp on Dec 23, 2013 11:03:27 GMT -6
nitro, any suggestions on jetting gona put one on my "73" nitro/ tohatsu 440-s
|
|
|
|
Post by gruppski55 on Jan 4, 2014 15:38:31 GMT -6
my 73 nitro 440 has 38 mic with 35 polit and 290 main jet works great
|
|
