|
|
Post by ruppluver on Jan 11, 2014 18:37:16 GMT -6
All the track data was "deleted" by the original poster.It was"pirated" from this site to "another" sled site! Usually,if you need Rupp info come to this site.  |
|
|
|
Post by timma1979 on Jan 20, 2016 22:11:10 GMT -6
Any track data for a 1974 Nitro II? Or does which Polaris track should I be looking for? I'd like to replace it with a new track.
|
|
|
|
Post by mrmotors on Jan 21, 2016 1:27:17 GMT -6
Rupp Track #33691, 2.52, 48 windows, 9" c to c, 121" length, 16.5 wide
|
|
|
|
Post by lemans1955 on Jan 21, 2016 10:33:27 GMT -6
If you want to replace it with a Polaris track use an older Indy 121x15 track with no higher than 3/4" lugs. You can use the standard Rupp drivers but will need to relocate them on the shaft to fit the new track.
|
|
|
|
Post by sdcbay123 on Feb 24, 2016 12:13:44 GMT -6
Hi guys, i am new to this site and have a question. recently pick up a 71 440 WT that basically just needed some cosmetic redo which i did and had running for are antique fun run here in the U.P. we had every wet snow conditions and my track spun almost the whole time and pack itself with slush and snow .the track is worn and i was wondering if it is possible to update to something more modern or add studs has any one done this and what would it take ,or is there a current supplier to replace this track.
|
|
|
|
Post by seacoastrupp on Mar 7, 2016 14:52:40 GMT -6
Is it possible some Scorpion tracks might work for the F/A's?? 2/3rd cleats but should be able to get them Rupps back on the snow ;D 1976-'79 Range Whip (with Paraslide) 1977-'79 TK and TKX (with Paraslide) 1978 Sting 440 w/Paraslide susp. they are 3.29" pitch w/36 cleats (Pitch qty) and 16" wide. Scorpion's specs is 3.29" X 36= 118.44"-same as the F/A Not sure if it would work but worth looking into, I see them available now from Kimpex-just a thought. I have a N.O.S. one if anyone is interested... |
|
|
|
Post by dtslisten on Mar 7, 2016 22:37:21 GMT -6
What is the NOS track you have seacoastrupp?
|
|
|
|
Post by seacoastrupp on Mar 8, 2016 13:08:55 GMT -6
It is the forementioned Scorpion TKX track 118"x16"w 3.29 drive
|
|
|
|
Post by 72RuppSport on Jan 11, 2017 6:50:11 GMT -6
I just got my first Rupp (1974 Rupp Sport 340) and would like to replace the track and potentially drive sprockets. Does anyone happen to know the correct part number or size of the track? My preference would be to replace with a newer track I can find through royal distributing and modify the axel/drive sprockets slightly.
Thanks for your help!
John
|
|
|
|
Post by brandosleds on Jan 15, 2018 13:11:37 GMT -6
Does anyone have specs and part numbers for 1969 Rupp SnoSport GTE 300? I think track width was all 15 1/2 but wanting to make sure length is correct.
|
|
|
|
Post by ruppluver on Jan 15, 2018 13:41:09 GMT -6
The chart stated that the GT300 used a 57 drive window track=114" long.Whereas,the GT370,used a 60 window track or 120" long.Those tracks are getting tough to find.
|
|
|
|
Post by sprint on Apr 29, 2018 5:56:15 GMT -6
I am looking for a replacement 120"x 15" center drive track for my 1970 Rupp Sprint 40
|
|
mishka
Senior Member
Posts: 18
|
Post by mishka on Dec 23, 2023 4:47:03 GMT -6
Need Polaris skid mounting dimensions. I just bought a very nice track and skid out of a 1989 Polaris Trail Indy for my 1976 340 Nitro. 15” 2.52 pitch 121” The dimensions below from JBShocks are for upgrading a Polaris to the extra 10 skid. I need the same dimensions for the stock skid. The Rupp skid needs a good cleanup, new wheels, and shock. The Polaris skid and track look like new. 8” travel and 15 years newer tech should be good for my back. If anyone has that those measurements from an installation or access to a Trail Indy, I’d really appreciate them. Thanks, Dave  |
|
