|
|
Post by red19lite on Mar 12, 2013 19:45:29 GMT -6
the connectors on the small terminals are called molex you can get them at radio schack, the larger black molded connector uses packard 56 teriminals the oringnal molded plug was from gm and was used in a air conditing circut, the bad news is the molded block is no longer available unles you find some old stock some where, the molded plug for the headlite is a old gm part also they are still available, nice job showing the circuts stertch, i have some of connectors left if any body has the need , kevin, if you move yout pc board up to the chaincase on 76 l/c you can shorten all the harneesses to it and clean a lot wiring up, you can take a scribe and bend the connectors to get them to fit tighter to the board also
|
|
|
|
Post by red19lite on Mar 13, 2013 19:49:52 GMT -6
dont mess with the posts on the pc board just pick at the ends of the of the female connectors in the plastic molded connectors to tighten connection to the posts on pc board
|
|
|
|
Post by snosnake on Mar 29, 2013 6:30:01 GMT -6
Thanks stretch this should come in handy for a lot of guy's.
|
|
|
|
Post by magnumal on Apr 12, 2013 8:33:41 GMT -6
very nice Iam going to be needing this this summer !!! Now if I just had a printer that worked lol I cant afford ink I bought to many parts for my sleds lol
|
|
|
|
Post by snikr on Apr 14, 2013 14:05:40 GMT -6
I might be able to print it out and snail mail it to you if you'd like Al.
Tom
|
|
|
|
Post by Stretch on Feb 28, 2015 11:17:11 GMT -6
Guys, I will re-post the PC Board Map but would like it to stay on this site! I don't care if you save a copy for your own personal use but, I really do not care to have it posted on other websites...  |
|
|
|
Post by kerry on Feb 28, 2015 18:13:09 GMT -6
Thank you for the schematic Stretch this helps my understanding of the board routing much better.
red19lite- I have a couple boards that have been resoldered. I guess it doesn't hold that well eh.My original board 33400 has one bad terminal and it is the power to the board.Worked on initial start up and went out.The only terminal that was resoldered.I put a board in from a 75 with the blade terminals and it is good.
Kerry
|
|
