|
|
Post by Johnny Speed on Sept 19, 2013 9:16:03 GMT -6
What works for flyweights and springs, book says A14 flyweights? I have a set of A2's - will these work with what spring? Using stock secondary. Thanks for any help!
|
|
|
|
Post by Hoots on Sept 19, 2013 14:02:31 GMT -6
If you want a rocket, Polaris Blue with around Poo 10-58 wghts, stock secondary 2nd hole from tightest. If don't like the higher engagement, go a little lighter on start rate with spring. Thats assuming its a 440, if 340=don't know.
|
|
|
|
Post by Johnny Speed on Sept 19, 2013 15:51:01 GMT -6
It is a 440! So the Polaris flyweights and spring will fit ok in a comet 102C?
|
|
|
|
Post by Hoots on Sept 19, 2013 19:12:32 GMT -6
Definitely, more easily available and I like the profile of the m series poo wits. Alittle more aggressive and pull nice all the way through power band.
|
|
|
|
Post by Ruppsforever on Sept 19, 2013 19:45:52 GMT -6
I agree... Polaris 10 series weights work real well. For trail riding I like a Polaris almond gold spring and 10-MW weights.
|
|
|
|
Post by jonsbadcats on Sept 20, 2013 19:21:02 GMT -6
is there not a big difference from a 10\58 to a 10 mw just asking,
|
|
|
|
Post by Ruppsforever on Sept 20, 2013 20:53:52 GMT -6
There is a huge difference. I'm thinking Larry hit the wrong button ?? 10-MW is about 48 grams. 10-58 is 58 grams. 58 grams would make the motor only run at maybe 7000 RPM's. Larry ??
|
|
|
|
Post by Hoots on Sept 21, 2013 8:24:32 GMT -6
Not my motor LOL ! 58.9gr. 10 mw is what my 340 f/a pulls spinning around 9000. The F/A has has alittle more work done to it than the dripperLOL. Listen to Josh for a totally stock Nitro. I was thinking that my buddy was pullin about the same setup with his Nitro but both of ours don't have air boxes ,have better reeds , and a few other secrets..
|
|
|
|
Post by Ruppsforever on Sept 21, 2013 9:23:56 GMT -6
Crazy !!! Now you got me wondering.........
|
|
|
|
Post by racingelvis on Sept 21, 2013 10:32:27 GMT -6
larry, am i reading this write?? you are running a 58.9 gram weight in one of your drag race sleds??
|
|
|
|
Post by jonsbadcats on Sept 21, 2013 10:43:27 GMT -6
the info you gave would really screw a guy up lol lol i assume he was talking a stock motor,
|
|
|
|
Post by Johnny Speed on Sept 21, 2013 18:29:34 GMT -6
It is stock and the spec for the Comet A2's I have is 48 grams so I may try them and find a gold spring?
|
|
|
|
Post by Hoots on Sept 22, 2013 19:53:27 GMT -6
larry, am i reading this write?? you are running a 58.9 gram weight in one of your drag race sleds?? Yes, as I stated earlier, heavy spring, heavy wgts. Works for me, 440 trail sled/ lake racer. |
|
|
|
Post by Johnny Speed on Sept 24, 2013 11:26:44 GMT -6
I picked up an almond/gold spring at Douglas so one more peice of the puzzle found! Thanks for the help.
|
|
