|
|
Post by Johnny Speed on Aug 19, 2013 5:53:25 GMT -6
What should I use for ramps, weights and spring in artctic hex clutch for 76 Nitro liquid 440? Clutch has the small rollers at the weight arms.
|
|
|
|
Post by Johnny Speed on Aug 29, 2013 9:05:36 GMT -6
Thanks for the specs! Any advantage using the 77-78 specs in a 76?
|
|
|
|
Post by rog929 on Aug 29, 2013 11:01:00 GMT -6
I've got those if you need some
|
|
|
|
Post by Johnny Speed on Aug 30, 2013 20:47:12 GMT -6
Ok, now I have some options! Will have to check my stock of ramps and weights- I have both short blue springs and longer green springs. Seams to me my 75 340 sno twister has 105 weights - twister ramps are custom twister profile with no #'s on them. I am on vacation in Bozeman right now! I was down by McCall Idaho watching some crazy people kayak in class IV whitewater! This afternoon I watched 3 guys BASE jump off the bridge over the Snake River in Twin Falls Idaho! This was most excellent entertainment!!!
|
|
|
|
Post by magnesium on Aug 31, 2013 12:23:37 GMT -6
Someone named a river after Rick?
|
|
|
|
Post by snosnake on Aug 31, 2013 14:39:25 GMT -6
Someone named a river after Rick? Not only the river but the whole damn Canyon too! |
|
|
|
Post by snosnake on Aug 31, 2013 14:51:45 GMT -6
Johnny Speed I see you are from Owatonna...I thought that was Poo country.  |
|
|
|
Post by Johnny Speed on Sept 1, 2013 21:35:37 GMT -6
What is Poo country? I use to buy new polaris sleds till 1997 then switched to Ski-Doo and been buying new ones every couple years since. New 2014 600 e-tec should arrive in October!
|
|
|
|
Post by flynfol on Mar 8, 2015 11:27:44 GMT -6
Hi Guys,
I realize this is an old thread, but still trying to get my 76 440 to launch. I've tried all kinds of things over the years using a 102c with poor results. I see some of you use a hex clutch, which I still have a few of, but my ramps are painted with a pink dot....no numbers. Looking at the Rupp parts book only lists rupp p/n ...which I haven't seen since digging through the bowels of certified parts warehouse dungeon. Can anyone shed light? Or should I just buy some 331 or 294 ramps? Thanks, John
|
|
|
|
Post by Ruppsforever on Mar 8, 2015 12:50:27 GMT -6
A lot of people fail to realize that once you go from Hex to comet you need a shorter belt. The shaft size of the clutches are way smaller on a comet.
|
|
|
|
Post by flynfol on Mar 8, 2015 15:21:41 GMT -6
thanks
|
|
