1970 Rupp WT Cog Wheels

« Prev
1
Next »

roger New Member Posts: 1	1970 Rupp WT Cog Wheels Jan 21, 2008 11:25:24 GMT -6 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by roger on Jan 21, 2008 11:25:24 GMT -6 Hello, i have a 1970 Rupp WideTrack waiting assembly. All i need is a set of the two cog wheels to setup the track assembly. Can i swap them from another snowmobile or do i have to find a new set, thanks!

RuppParts
Senior Member

Posts: 455

1970 Rupp WT Cog Wheels Jan 21, 2008 12:06:14 GMT -6

Quote

Post by RuppParts on Jan 21, 2008 12:06:14 GMT -6

Rog, all the same from 70-73.......70 rear is same as the front. Make sure you don't put hard, rotten originals in or you will be doing the job all over as the internal drive sprockets are failing due to age. That is why I remade them

70 WT440E, 72 Yankee, 73 Nitro, 77 Nitro, Go-Joe, Rupp bikes

Shoutbox

Rupp Luver: I've been gone for so long,my account was closed.I'm doing my last Rupp build,you can follow it on Vintagesledders.com on Face Book.Yes Rick,its the end of the line! Nov 16, 2023 17:17:20 GMT -6

Rons Rec. Parts: Hi. We've been cleaning House. Back in the 60s-70s we were a Rupp dealer. We found 10 pallets of new Rupp Snowmobile parts & plastic buried in the warehouse. We would like to sell the whole lot if possible. If interested contact Dwaine @ 907-262-5235 Dec 20, 2023 16:39:32 GMT -6

ruppster1263: Im looking for a track for a 1969 RUPP GT300 center drive Jan 28, 2024 12:31:27 GMT -6

KISS MY RUPP: do you have a part # ? Feb 1, 2024 18:31:54 GMT -6

NOT HERE: ALL the action is on Face Book,not here. Sept 13, 2024 21:54:14 GMT -6

1970 Rupp WT Cog Wheels

Post by roger on Jan 21, 2008 11:25:24 GMT -6

Post by RuppParts on Jan 21, 2008 12:06:14 GMT -6

Shoutbox