|
|
Post by ruppluver on May 13, 2014 18:18:01 GMT -6
On the Rupp sleds that have involute drivers,is the round,center of the wheel[not the lugs] centered in between the lugs on track or are they off to the side,either on the inside or outside?  When adjusting the track,are both sides adjusted equal?? Thanks.  |
|
|
|
Post by Ruppsforever on May 13, 2014 18:38:22 GMT -6
They should be centered. Both sides should be equal but that seldom works perfect. For instance... a track that is drifting to the right. Needs to have the right tightening bolt tighter. Tracks always drift to the loose side. Hope this helps
|
|
|
|
Post by ruppluver on May 13, 2014 18:46:47 GMT -6
So,you adjust the involute track just like the sprocket drive track.Very interesting.I thought involute would be equal adjustments.Hmmmmmmm.Thanks.
|
|
|
|
Post by magnumal on Jul 2, 2014 8:39:16 GMT -6
You need to make sure those nuts stay in place, because it isn't pretty when the bolt backs out and catches the bars !
|
|
|
|
Post by BeatUpRupp on Aug 6, 2014 18:07:26 GMT -6
In a perfect world they would be adjsuted equally but ... these are Rupps  |
|
