|
|
Post by mrrupp1 on Dec 16, 2014 15:02:40 GMT -6
I am freshning up a 76 Liquid motor for my oval sled and want to clean up the head. What is the max I can mill it? Thanks Clint
|
|
|
|
Post by red19lite on Dec 17, 2014 16:32:03 GMT -6
several factors, most stocker,s just need small clean up to make flat again , I like to deck both cylinder tops found lots of height issues on stocker,s .060 squish or close would be good, I have different thickness base and head gaskets to adjust, Attachment DeletedAttachment Deleted picture,s are of a couple different way,s to change chamber and raise comp ratio ,kevin |
|
|
|
Post by mrrupp1 on Dec 18, 2014 12:14:40 GMT -6
Kevin, thanks for the info. I wasn't sure what I could go without getting into trouble. I told my machinist just to make it flat. Thanks for all your help Clint.
|
|
|
|
Post by Johnny Speed on Dec 18, 2014 16:45:46 GMT -6
Kevin, got any pics of those independent heads with the plumbing coming out to thermostat etc, no more green dripper with those heads on different height cylinders!
|
|
|
|
Post by snosnake on Dec 18, 2014 21:42:08 GMT -6
Kevin, got any pics of those independent heads with the plumbing coming out to thermostat etc, no more green dripper with those heads on different height cylinders! Once a green dripper always a green dripper...  |
|
