|
|
Post by ruppluver on Aug 31, 2016 16:51:59 GMT -6
 I'm going to use this track,as it is too good to throw away!! There are about 6 cracks that go across the track,about a 1/16" deep or less. What are your thoughts on this.This track was rolled up.Has VERY few smaller stress cracks,that barely break the surface.  Thanks. |
|
|
|
Post by snosnake on Aug 31, 2016 21:39:32 GMT -6
Run it..
|
|
|
|
Post by magnumed on Sept 1, 2016 5:54:30 GMT -6
I agree run it but keep an eye on that crack, it may get worse. One nice thing if it goes it won't be hard to take off...hope it last for you Dan.
|
|
|
|
Post by ruppluver on Sept 1, 2016 10:02:59 GMT -6
That is the ONLY bad spot on track.I'm thinking it may have been rolled up too tight & too long!! Should that track be run a little loose? It would seem,that if run tight,more stress will be put on the track,looser,not so much.Is there something that can be put in the crack,to at least keep the elements & debris out? Thanks.
|
|
|
|
Post by 400nitro on Sept 2, 2016 21:27:38 GMT -6
does anyone near you does recapping or vulcanizing tires. they could seal it.
|
|
|
|
Post by 400nitro on Sept 6, 2016 20:23:23 GMT -6
I just saw that commercial for flex seal? that spray on rubber sealant. how would that work? maybe a thin coat to hide dry cracks on a show sled?
|
|
