Post by nitromania on Jan 26, 2018 21:25:02 GMT -6
Can someone post up a pic of the circuit board from a 78 Nitro?
Need to see how/where it mounts, and how the wires are routed to it if possible, esp around the coolant hose.
Also, is the underhood air duct the same on 77 & 78 hoods?
I know the exterior intake holes are different as seen here:78 Rupp
Also, as seen in the pics, is the cutout in the center lower panel by the pipes correct?
Water gooseneck on motor and surge tank and cap up thru the console correct for 78?
Thanks, try to document what's right and what's not before I blow it apart and clean it up.
Need to see how/where it mounts, and how the wires are routed to it if possible, esp around the coolant hose.
Also, is the underhood air duct the same on 77 & 78 hoods?
I know the exterior intake holes are different as seen here:78 Rupp
Also, as seen in the pics, is the cutout in the center lower panel by the pipes correct?
Water gooseneck on motor and surge tank and cap up thru the console correct for 78?
Thanks, try to document what's right and what's not before I blow it apart and clean it up.