|
Post by nitromania on Jan 29, 2018 6:33:35 GMT -6
Looking for a Comet 102c for my Nitro with the 340 Xenoah. Hex clutch had mouse nest in it, rollers and ramps all rusted. Looking to replace with good clutch. let me know spring color and weights in it. Let me know if you can help.
|
|
|
Post by Rupp Doctor on Feb 12, 2018 9:56:54 GMT -6
Looking for a Comet 102c for my Nitro with the 340 Xenoah. Hex clutch had mouse nest in it, rollers and ramps all rusted. Looking to replace with good clutch. let me know spring color and weights in it. Let me know if you can help. Where are you located? are you still looking?
|
|
|
Post by nitromania on Feb 12, 2018 14:03:20 GMT -6
Should have one coming by end of this week or so, along with some other things needed. Need a track, or a good tutorial on swapping in a Polaris 121". Also need a good console. Does anyone know if the underhood duct work changed from 77 to 78? can you run a 77 hood with a 78 console, or is there interference? Have a 77 hood now, prefer the look of that one, but have a 78 console that's broken.... I know the 78 graphics and upper exterior vents are different, but have not seen the underhood duct to compare.
Thanks for the reply, thought I was alone here..........
|
|
|
Post by Rupp Doctor on Feb 14, 2018 3:37:26 GMT -6
Should have one coming by end of this week or so, along with some other things needed. Need a track, or a good tutorial on swapping in a Polaris 121". Also need a good console. Does anyone know if the underhood duct work changed from 77 to 78? can you run a 77 hood with a 78 console, or is there interference? Have a 77 hood now, prefer the look of that one, but have a 78 console that's broken.... I know the 78 graphics and upper exterior vents are different, but have not seen the underhood duct to compare.
Thanks for the reply, thought I was alone here.........
I am Jerry from minnesota, I know alot about Rupps but this question on console i not know. your asking if you can keep the 77 hood and just put the78 console in the 77 hood ? if you wanna know just correct me if am wrong,, but i can find out. My guess is yes,because the hood fiberglass is the same and am sure it was just the woodgrain part on dash that is different.Don't know 100 % but i am sure it will work with minor mods, I do Fiberglass reproduction for all of the Rupps, so am sorta familiar . ever need glass message me
Track conversion, Hold on for a little while . I just a tested prototype conversion about ready to market.It will work with ant Track from 4 manufacturers that made a track 121" with a 252 pitch, Rip saw tracks have been installed on sleds and tested to work. If you want to carry the skis across the road. this is going to be the new Hot setup for Rupps. Not everyone is going to switch because its not original,,, But i will get alot of people who ride their sleds and the ones who want more power and traction. eventually most will convert. E-mail me jgreene59@gmail.com or text me @218-244-1225
|
|