|
|
Post by celerymobile on Oct 13, 2022 19:25:18 GMT -6
I am wondering if anyone knows what the 440 Rally idle speed should be around? Also wondering if anyone happens to have a service manual for it.
|
|
|
|
Post by mrrupp1 on Oct 14, 2022 15:08:13 GMT -6
Rupp wants the idle around a 1000 RPM. I set mine at 1200 RPM.
|
|
|
|
Post by celerymobile on Oct 26, 2022 8:04:10 GMT -6
Rupp wants the idle around a 1000 RPM. I set mine at 1200 RPM. Thanks for the response I'll try to get get set around there. |
|
|
|
Post by celerymobile on Nov 7, 2022 15:35:03 GMT -6
I have a couple more questions the first are the side marker lights t10 bulbs? Second is there any aftermarket rear sprockets? Mine all the teeth are broken off pretty much.
|
|
|
|
Post by mrrupp1 on Nov 8, 2022 19:11:44 GMT -6
The side marker lights are part number 194. The 76 Rally does not have sprockets in the rear, it just has 2 idler wheels. Now the 72 Rally has rear sprockets. Rick Weaver is the guy you can get the sprockets from for about any Rupp sled. You can get his number on any of the Rupp Facebook pages.
|
|
|
|
Post by celerymobile on Nov 23, 2022 21:23:03 GMT -6
The side marker lights are part number 194. The 76 Rally does not have sprockets in the rear, it just has 2 idler wheels. Now the 72 Rally has rear sprockets. Rick Weaver is the guy you can get the sprockets from for about any Rupp sled. You can get his number on any of the Rupp Facebook pages. Going back and looking at it I do not know how I saw them as sprockets. I do have another question I am trying to adjust the chain tension on this and I'm confused on how you are supposed to do it. The manual says turn eccentric housing until correct tension but I cant get anything to turn. imgur.com/a/QsVHlxE Here is a picture of how it looks I'm wondering if you could give me any advice on it. Just trying to be careful and not destroy anything so figure ill ask before I try more. |
|
|
|
Post by Ruppsforever on Nov 24, 2022 10:25:53 GMT -6
Those 3 bolts that you loosen. Pound them in with a rubber hammer. You don't have to pound them all the way in just enough so it unlocks the eccentric. That should take care of your problem.
|
|
|
|
Post by celerymobile on Nov 25, 2022 21:30:46 GMT -6
Those 3 bolts that you loosen. Pound them in with a rubber hammer. You don't have to pound them all the way in just enough so it unlocks the eccentric. That should take care of your problem. Thank you so much that did it! Almost have the suspension and track off now. I think I have tracked down why my speedometer isnt working also. imgur.com/a/htdXpHB this piece here is seized up and its missing the key. Is there any aftermarket ones of those anyone knows about? |
|
|
|
Post by celerymobile on Dec 1, 2022 22:45:28 GMT -6
I noticed one of the little plastic blocks on my clutch were missing could any one provide a link to replacement ones? I noticed there are a lot of different shapes I am assuming that matters so dont wanna order the wrong kind. imgur.com/a/KM6f3Yn this is the clutch. |
|
|
|
Post by Ruppsforever on Dec 3, 2022 13:10:55 GMT -6
Those speedometer drive spring things are kind of hard to find. I think some Polaris's used them but they are too short. I have those plastic blocks if you need some.
|
|
|
|
Post by celerymobile on Dec 3, 2022 22:40:02 GMT -6
Those speedometer drive spring things are kind of hard to find. I think some Polaris's used them but they are too short. I have those plastic blocks if you need some. I was gonna order one of those to try wasn't sure how long they have to be so have not done that yet. How much would you be charging for the plastic blocks? |
|
|
|
Post by Ruppsforever on Dec 4, 2022 13:32:56 GMT -6
Yeah I really am unsure of those speedometer things. If you get one let me know what you ordered. How does $10.00 sound for 3 ??
|
|
|
|
Post by celerymobile on Dec 7, 2022 17:26:53 GMT -6
Yeah I really am unsure of those speedometer things. If you get one let me know what you ordered. How does $10.00 sound for 3 ?? $10 sounds good how would I pay for them? |
|
|
|
Post by mrmotors on Dec 7, 2022 21:44:23 GMT -6
Are you talking about the little square section speedometer cable that goes into the nylon plug of the driveshaft and the drive adaptor for the speedometer cable? Probably around 2" long or so?
|
|
|
|
Post by celerymobile on Dec 8, 2022 17:45:23 GMT -6
Are you talking about the little square section speedometer cable that goes into the nylon plug of the driveshaft and the drive adaptor for the speedometer cable? Probably around 2" long or so? Yeah it should be this I found a guy selling one he said it is 2 5/8" long. Hopefully I'll be buying that soon. |
|
|
|
Post by Ruppsforever on Dec 8, 2022 19:03:16 GMT -6
I sent you a message.
|
|
|
|
Post by mrmotors on Dec 15, 2022 20:19:27 GMT -6
Yeah it should be this I found a guy selling one he said it is 2 5/8" long. Hopefully I'll be buying that soon.
If you can such a thing as a speedometer shop, should be able to get one made...
|
|
|
|
Post by celerymobile on Dec 17, 2022 20:39:15 GMT -6
Yeah it should be this I found a guy selling one he said it is 2 5/8" long. Hopefully I'll be buying that soon. If you can such a thing as a speedometer shop, should be able to get one made...Didnt occur to me this was a thing, ended up ordering the one and it fits perfectly. |
|
|
|
Post by celerymobile on Dec 17, 2022 20:43:02 GMT -6
imgur.com/a/Ruo9Laq could anyone tell me if this is the correct order of the parts? I believe it is but the little space I'm unsure of since it fell out without me being able to see where it was. Also a question about the chain tension one side of the chain will have a little slack while the other is tight when you turn the track?
|
|
|
|
Post by mrmotors on Dec 18, 2022 21:39:24 GMT -6
Didnt occur to me this was a thing, ended up ordering the one and it fits perfectly.
Well, left the word find out.... I meant for the most part good luck finding a speedometer shop that is still in business...[/b][/font]
|
|
