Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 21, 2007 20:27:22 GMT -6
I found these in the belly pan when i pulled the gas tank some years ago. I never knew where they went or what they were. On the flat side where the washer was there is a part number. It looks like 14 3 Any one know what they are and where they belong ? Thanx, Dave.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 22, 2007 16:01:18 GMT -6
Looks like half of a motor mount. Should be a upside down bowl shaped part that slips over top of it with the motor plate in between. Joe
|
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 22, 2007 17:43:19 GMT -6
Hi Joe, Thanks for your reply. I placed another pic. so you can see the size. It is too small for a motor mount. It is 3/4" across.   |
|
|
|
Post by RuppParts on Jul 23, 2007 22:12:08 GMT -6
Dave, possibly a replacement for the rubber bumper that fits over the hood pins? I know they aren't correct but may have been thought to be usable if ever needed?
|
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 24, 2007 9:17:57 GMT -6
Thank you Brandt,
This does make sense. I believe you would be correct.
Good Thinking !!! Dave
|
|
Dave
Administrator'
{S=0}
Posts: 1,765
|
Post by Dave on Jul 24, 2007 11:54:49 GMT -6
Check this out Brandt, I found this by accident when i was parts surfing. This would explain the location of where i found them. My father was the one who added the braided lines and this is what must have been in its place. What do you think? Dave.  Detailed Description Metal gas tank fittings have rubber bushings to fit 1/2 inch holes in metal or plastic tanks. Single, 90deg push-in design is original equipment on many machines. Fittings work well for custom applications. |
|
